Jlg X14J Operator Manual User Manual

Operation, Safety, Maintenanceand service ManualOriginal Instructions - Keep this manual with the machine at all times.Boom Lift ModelsX14JJanuary, 20

X14JR04201136BOOM LIFT MODELS X14JJLGEC DECLARATION OF CONFORMITYEC DECLARATION OF CONFORMITYManufacturerJLG Industries IncAddress1 JLG Drive McConnel

LED IndicatorTECHNICAL SPECIFICATIONST=25°C unless otherwise specified.BOOM LIFT MODELS X14JJLG96X14JR0420113ColourDescriptionRed steadyCurrent delive

97Before use, carefully read the instruction booklet.Make sure that the charge curve selected is suitable for the type of battery being rechar‑ged.6.8

6.8.4 REPAIR AND MAINTENANCE OF ROOFING AND GUTTERSRemember that it is prohibited to use the platform for the transport of material at a heighteven if

7. MAINTENANCE7.1 SAFETY INSTRUCTIONS FOR GREASING AND LUBRICATION• Errors can be extremely dangerous. Before greasing or making repairs read the user

* Readily biodegradable classification indicates one of the following: CO2 Conversion >60% per EPA 560/6‑82‑003 / CO2 Conversion > 80% per CEC‑L

1017.3 GREASING POINTSRESPECT THE GREASING INTERVALS INDICATED AND USE ONLY THE RECOMMENDED LUBRICANTS INORDER TO PROTECT PINS AND CONNECTIONS FROM WE

7.4 GREASING THE TELESCOPIC ARMUse a brush to apply grease onto the telescopic exten‑sion arms.7.5 SAFETY INSTRUCTIONS FOR MAINTENANCE OPERATIONS• Spa

• Fluid that leaks under pressure may penetrate the skin. Always discharge pressure befo‑re removing the hydraulic hoses and tighten connections corre

7.7 PERIODICAL MAINTENANCE INTERVALSHONDA PETROL ENGINE* First operation.** At least every 3 months.*** At least every 5 years.# Anyway every year. If

105BOOM LIFT MODELS X14JJLGX14JR0420113HATZ DIESEL ENGINE* First operation.** At least every 3 months.*** At least every 5 years.# Anyway every year.

EC DECLARATION OF CONFORMITYManufacturerJLG Industries IncAddress1 JLG Drive McConnellsburg PA17233 USAMachine Type:Mobile Elevating Work PlatformMode

7.8 ELECTRIC MOTORThe electric motor is located inside of the carriage distributor support cover.7.8.1 ELECTRIC MOTOR MAINTENANCEPeriodically check th

7.9 INSPECTION AND MAINTENANCEAll JLG aerial platforms must be inspected, tested and serviced according to the followinginstructions. See the user and

X14JR0420113108BOOM LIFT MODELS X14JJLGdeterioration of hoses, o‑rings or other rubber components.3. Fuel filters.4. Fan belt adjustment and excessiv

X14JR0420113BOOM LIFT MODELS X14JJLGneer.This inspection must:1. consider the service history of the aerial platform in terms of hours of service, se

X14JR0420113110BOOM LIFT MODELS X14JJLG7.10 GENERAL PERIODICAL CHECKSAfter the first 2000 hours of operation, have a general check run on the machine,

X14JR0420113BOOM LIFT MODELS X14JJLG7.11 MAINTENANCE ON THE RUBBER TRACKS7.11.1 CHECKING THE TRACK TENSIONStop the machine on solid, level ground. Lif

PERICOLOFig. ACORDED'ACCIAIOSCULTURALATO RUOTAFORO RUOTADENTATAANIMA METALLICA5. To tighten the track, connect a grease gun to grease nipple 2 an

‑ internal breakage of rollers;‑ operation on sandy ground.C) Separation of the metal coresThe metal core acts as a sort of adhesive for the rubber be

7.11.4 CHANGING THE RUBBER TRACKSThe grease contained in the hydraulic track is pressurised. For this reason, do not loosengrease nipple 1 more than 1

3. Engage the track links with the sprocket and position the other end of the track on theidler roller.4. Turn the sprocket in reverse (7) pushing the

1. PRESENTATIONThis manual describes the warning signs used to draw the reader’s attention to several parti‑cularly important warnings.The safety warn

X14JR0420113116BOOM LIFT MODELS X14JJLGSize TPI Bolt DiaTensile Stress AreaClamp Load Clamp LoadIn Sq In LB IN-LB [N.m] IN-LB [N.m] IN-LB

117BOOM LIFT MODELS X14JJLGX14JR0420113Size TPI Bolt DiaTensile Stress AreaClamp Load See Note 4Clamp Load See Note 4In Sq In LB IN-LB [N.m

BOOM LIFT MODELS X14JJLG118X14JR0420113Size PITCHTensile Stress AreaClamp LoadTorque (Dry or Loctite® 263TM)Torque (Lub)Torque (L

1197.13 CHECKING THE HYDRAULIC OIL LEVELThe check must be carried out with the platform (EWP) and the stabilisers in the restingposition on flat groun

7.15 CHECKING THE CONDITION OF THE FILTER CARTRIDGEThe cartridge must be replaced on every oil change and according to the intervals specified in the

b) Go to the control position and switch the machine on.c) Close one of the two right stabilisers completely and maintain the movement activated.Rea

7.19 CHECKING WEAR ON THE EXTENSION ARM INTERNAL SLIDING RINGIt is important to check the wear on the extension arm internalsliding ring secured to th

7.21 CHECKING TIGHTNESS OF THE TURNTABLE BOLTSCheck the correct tightness of the top and bottom bolts on the turntable according to theintervals speci

7.22.2 RECHARGING THE BATTERY THERMIC VERSION‑ The battery must be recharged in well ventilated places, away from naked flames andpossible sources of

7.22.3 REPLACING THE BATTERY THERMIC VERSION‑ Do not disconnect the cables with the engine running.‑ Before disconnecting the cables, turn the engi

2. TECHNICAL INFORMATION2.1. DESCRIPTION OF THE MACHINEThe JLG machine is a self‑propelled hydraulic lifting device, equipped with a rotating workbas

dangerous.Avoid leaving the machine in sunny and badly ventilated places for long periods.The battery pack is connected to the motor control via a 100

127EXPLODED DIAGRAM OF SYSTEM COMPONENTS1) Battery case cover2) Remote control switch 3) 100A 48V fuse4) 12V 12Ah battery5) Starter6) Suction fan7

7.23.2 PERSONAL PROTECTIVE EQUIPMENTWhen recharging the battery pack and during any other maintenance operation on the bat‑tery pack, it is necessary

1297.23.3.1 Procedure for handling hot cellsAs soon as it has been established that the temperature of a cell has risen considerably, thefirst action

7.23.3.2 Procedure for handling vented cellsIn normal conditions a cell does not show leaks or venting, however a cell may vent or relea‑se substances

131SKINWash in cold water under a shower, remove contaminated garments. Continue washingfor at least 15 minutes. Seek medical help where necessary.RES

‑ Place the contaminated material in a sealable plastic bag and remove the excess air.Seal the bag.‑ Place a cup of vermiculite in a second bag, place

133• Minimum equipment required‑ Class D fire extinguisher‑ Class ABC extinguisher for any secondary fires‑ Breathing apparatus‑ Fireproof clothing‑ F

help.SKINWash in cold water under a shower, remove contaminated garments. Continue washingfor at least 15 minutes. Seek medical help where necessary.R

1358 SAFETY STANDARDS FOR TRANSPORTAlways make sure that the vehicle used to transport the platform has suitable capacity andthat no part of the MEWP

X14JR042011310BOOM LIFT MODELS X14JJLGCONTROL POSITION ON THE GROUND:There is a second control position for the track part. This position is not fixed

8.2 LOADING AND UNLOADING THE MACHINE ON TRANSPORT VEHICLES USING RAMPSThe JLG platform offers high manoeuvrability and stability even in travelling c

8.3 LIFTING THE MACHINETo lift the machine, first of all a lifting device is required that has a suitable capacity depen‑ding on the distance and the

8.3.1 HOW AND WHERE TO ATTACH THE PLATFORMTo lift the platform it must be attached to each stabiliser using the appropriate fixing rings asindicated i

8.4 TRANSPORTING THE MACHINEOnce on the trailer the machine must be fixed using tie rods as shown in the photo below.Make sure that the dimensions of

X14JR0420113140BOOM LIFT MODELS X14JJLG

1419 SERVICE MENU ON THE REMOTE CONTROLA SERVICE button is available on the remote control (ref. button 6), used to display the sta‑tus of the machine

BOOM LIFT MODELS X14JJLG142X14JR0420113ESSICAE A If both are ON, the safety devices for the aerial part have been disabled using specialkey.ESSICAE

9.2 ERROR MENUIndicates correspondence between the double sensors, either (OK) or (FAULT).The sensors are listed on different pages:1 PREC ACCESS THE

BOOM LIFT MODELS X14JJLG144X14JR042011310. TROUBLESHOOTING PROBLEMS CAUSES SOLUTIONSThe pump is particularlynoisy.• The pump does not suck• The pump

145BOOM LIFT MODELS X14JJLGX14JR0420113PROBLEMS CAUSES SOLUTIONSAt the end of the job it is notpossible to de‑stabilise theequipment• The aerial part

There is a control position usable only for operations of ordinary and extraordinary mainte‑nance operations, position placed next the machine near t

ALARMSINVERTER FAULT CODESX14JR0420113146BOOM LIFT MODELS X14JJLGCODE MEANING1Wrong ConfigCause: EEPROM memory not configured.Solution: Contact Jlg aer

147BOOM LIFT MODELS X14JJLGX14JR0420113CODE MEANING37Contactor closedCause: Relay remains closed when power to coil is disconnected.Solution: Check re

N.B.: the CODE column indicates the CAN CODE in the message sent by the battery charger.The normal mains voltage tolerance is the rated value ±15%.BOO

149BMS FAULT CODESCODETYPE OF ERRORA99E01 Configuration errorA99E02 Incorrect voltageA99E03 Incorrect temperatureA99E04 Excess discharge currentA99E05

BATTERY CHARGER FAULT CODESBOOM LIFT MODELS X14JJLG150X14JR0420113CODE DESCRIPTION STATUS ACTION8Internal logic fault. Baery charger stops working.Co

151BOOM LIFT MODELS X14JJLGX14JR0420113CODE DESCRIPTION STATUS ACTION248Temperature insidebaery charger toohigh.If internal temperature exceeds80°C,

11. CHECKS TO MAKE ON THE MACHINE AFTER REPAIRS11.1 CHECKING THE CORRECT FUNCTIONING OF CONTROLS‑ Check from the ground that the controls smoothly ac

12. HYDRAULIC SYSTEM12.1 HYDRAULIC SYSTEM DIAGRAM THERMIC VERSIONX14JR0420113BOOM LIFT MODELS X14JJLG153MMABRSFILOCILINDROANTERIORE DXPOSTERIORE DXSTA

12.1.1 KEY TO THE HYDRAULIC SYSTEM DIAGRAM THERMIC VERSION1 Hand pump2. 2 kW 4 pole electric motor, IP553 GX270 QME2 petrol engine3 1B30 diesel engine

X14JR0420113BOOM LIFT MODELS X14JJLG12.2 HYDRAULIC SYSTEM DIAGRAM WITH 2ND SPEED THERMIC VERSION155 MMSFILOCILINDROANTERIORE DXPOSTERIORE DXSTABILIZZ

2.1.2 MACHINE IDENTIFICATION PLATEThe rating plate is located on the front of the machine, on the electric motor protection guard(see photo).The drawi

12.2.1 KEY TO THE HYDRAULIC SYSTEM DIAGRAM WITH 2ND SPEED THERMIC VERSION1 Hand pump2 2 kW 4 pole electric motor, IP553 GX270 QME2 petrol engine3 1B30

12.3 HYDRAULIC SYSTEM DIAGRAM LITHIUM VERSIONX14JR0420113BOOM LIFT MODELS X14JJLG157MABRSFILOCILINDROANTERIORE DXPOSTERIORE DXSTABILIZZATORESTABILIZZA

12.3.1 KEY TO THE HYDRAULIC SYSTEM DIAGRAM LITHIUM VERSION1 Hand pump2 2.2 kW 4 pole electric motor, IP554 Double gear pump5 Pump outlet manifold bloc

15912.4 HYDRAULIC SYSTEM DIAGRAM LITHIUM VERSION (WITH SECOND SPEED)BOOM LIFT MODELS X14JJLGX14JR0420113MSFILOCILINDROANTERIORE DXPOSTERIORE DXSTABILI

12.4.1 KEY TO THE HYDRAULIC SYSTEM DIAGRAM LITHIUM VERSION (WITH SECOND SPEED)1 Hand pump2 2 kW 4 pole electric motor, IP554 Double gear pump5 Pump ou

16113 WIRING DIAGRAM• THERMIC VERSIONBOOM LIFT MODELS X14JJLGX14JR0420113

X14JR0420113162BOOM LIFT MODELS X14JJLG

• LITHIUM VERSIONX14JR0420113BOOM LIFT MODELS X14JJLG163

TRANSFER OF OWNERSHIPTo Product Owner:If you now own but ARE NOT the original purchaser of the product covered by this manual, we would like to know w

www.jlg.comJLG Sverige ABEnkopingsvagen 150Box 704SE - 176 27 JarfallaSweden +46 (0)850 659 500 +46 (0)850 659 534Oshkosh-JLG Singapore Technology E

13BOOM LIFT MODELS X14JJLGX14JR04201132.1.3 OVERALL DIMENSIONS OF THE MACHINEMaximum length in travel configuration with basket installed ...

2.1.4 TECHNICAL SPECIFICATIONSNB: Side outreach is measured from the centre of the turntable to the outside edge of thebasket.X14JR042011314BOOM LIFT

2.1.4.1 TECHNICAL DATA – PETROL ENGINEMake/Model ...HONDA GX270 ‑ iGX270 Fuel/Cooli

2.1.4.3 HYDRAULIC SYSTEM TECHNICAL SPECIFICATIONSHydraulic oil tank capacity...25 litresPump ...

172.1.5 TERMINOLOGYTo make the contents of this manual easier to understand, the diagram provided below illu‑strates the terms used to identify the pa

KEY1 Tracked undercarriage2 Turntable + rotation motor3 Revolving turret4 Emergency controls5 Base + electrical component compartment + oil tank6 Do

2.2 GENERAL SAFETY STANDARDSThe functioning of the MEWP must be in compliance with international standards of referen‑ce (see paragraph “NORMATIVE REF

USE THE TYPE‑APPROVED AND CERTIFIED SAFETY HARNESSES. BEFORE WORKING AT HEIGHT, MAKESURE THAT THE SAFETY HARNESSES ARE CORRECTLY FASTENED AND CONNECTE

• Cleaning the machineAlways park the machine as shown in the figure in point 2.1.5.When washing the machine, the ignition block must be disengaged, t

Only use dry detergents, in accordance with the manufacturer’s instructions. Never removecovers, guards and the like.‑ Clean the electrical system usi

232.3 SAFETY WARNINGS2.3.1 GENERALITIESTo avoid accidents, before starting work and before performingany maintenance operations, it is necessary to re

2.3.3 PICTOGRAMS POSITIONED ON THE MACHINEHere we report the positions of the various boards with pictograms on the machine.X14JR042011324BOOM LIFT MO

X14JR0420113BOOM LIFT MODELS X14JJLG25 KIT ADESIVI - X14J AUFKLEBERSATZ - X14J SET OF DECALS - X14J KIT ADHESIVOS - X14J KIT COLLANTS - X14J ADHESI

JLG LIFTFOREWORDFor:• Accident Reporting• Product Safety Publications• Current Owner Updates• Questions Regarding Product Safety• Standards and Re

X14JR042011326BOOM LIFT MODELS X14JJLGPos. Code Q.ty01 07060500 020203 07060600 0204 06041300 0405 07056700 0206 06040900 0207 1001125483 0608 0604180

LANGUAGE STICKERSX14JR0420113BOOM LIFT MODELS X14JJLG27Pos.Code Q.ty170635IT15 06561200 0424 07203200 0129 06448200 0230 06448100 0235 06555300 011706

X14JR042011328BOOM LIFT MODELS X14JJLG KIT ADESIVI - X14J AUFKLEBERSATZ - X14J SET OF DECALS - X14J KIT ADHESIVOS - X14J KIT COLLANTS - X14J ADHESIE

29BOOM LIFT MODELS X14JJLGX14JR0420113 KIT ADESIVI - X14J AUFKLEBERSATZ - X14J SET OF DECALS - X14J KIT ADHESIVOS - X14J KIT COLLANTS - X14J ADHESIE

LANGUAGE STICKERSBOOM LIFT MODELS X14JJLG30X14JR0420113Pos Codeqty1234 1001125483 35 06506400 16789 06520600 210...17 07264700 1Pos Codeqty171877IT1 0

31BOOM LIFT MODELS X14JJLGX14JR0420113Pos Codeqty171877ES1 07201900 1710111213 07202300 1Pos Codeqty171788NL1 07188900 1710111213 07188300 1Pos Codeqt

BOOM LIFT MODELS X14JJLG32X14JR0420113Code Name Description Identikit06040300WARNING KEEPSAFE DISTANCE06040500SENSE OF MOVINGUNDERCARRIAGEDEFINED AS T

X14JR0420113BOOM LIFT MODELS X14JJLG33Code Name Description Identikit06044000 LIFTING POINTINDICATES CORRECTLIFTING POINTS FORLIFT THE MACHINE0605630

X14JR042011334BOOM LIFT MODELS X14JJLGCode Name Description Identikit06165000HYDRAULIC OILLEVEL1701499FORBIDDEN LIFTINGPOINT1001125483DO NOT WASHWITH

35REPLACE STICKERS AND PLATES IF THERE IS ANY SIGN OF WEAR.FAILURE TO HEED ANY WARNINGS DUE TO A SAFETY STICKER BEINGDAMAGED, LOST OR IGNORED MAY CAUS

X14JR042REVISION LOGRev. Manual code DateOriginal Issue X14JR002 January, 201101 X14JR012 February, 201102 X14JR022 March, 201103 X14JR032 April, 2012

BOOM LIFT MODELS X14JJLG36X14JR0420113

3 SAFETY DEVICESThe information given below concerning the safety devices are provided to the user in orderto allow him/her to understand the machine

3.1 BATTERY CUTOUT SWITCHThis device, located on the left side of the electrical components compartment, is used to iso‑late the machine’s electrical

3.3 CYLINDER STOP VALVESThe stabiliser cylinders have a double stop valve which in case of system breakdown or hosebreakage stops the cylinder prevent

3.5 STABILISER POSITION MICROSWITCHESThe position of the stabilisers and their contact with the ground are detected by 4 microswit‑ches positioned nea

mode.When the maximum allowable load is reached, an icon appears on the radio control display,a sound signal is emitted and all platform movements are

Always check the correct levelling of the machine after every self‑levelling operation.Approximate levelling outside of the limits set by the manufact

3.11 SAFETY DEVICE ELECTRONIC CONTROL BOARDThe JLG platform has an electronic control board (seephoto) that enables the power supply to the ON‑OFF pro

4 INSTRUMENTS AND CONTROLSBelow is a description of all the controls and indicators present on the platform; each devicehas a sticker that briefly des

4.1.1 Display The display is used to view the status of the machine and the operational information neces‑sary or useful to the operator for use.When

BOOM LIFT MODELS X14JJLGTABLE OF CONTENTSCHAPTER 1 PRESENTATION ...Pa

POSITION 2:Position 2 displays the maximum weight according to the operating mode: 120 kg / 200 kgPOSITION 3:Position 3 displays the engine/motor sele

POSITION 5:Position 5 displays the icon confirming that aerial movements are enabled.This icon means that all conditions for using the overhead moveme

POSITION 6:Position 6 displays the icon confirming that track movements (stabilisers, tracks, track exten‑sion) are enabled.This icon means that all c

POSITION 8:Position 8 displays the battery charge status or the icon indicating the battery is beingrecharged.Position 8 is also used to show the sele

5607071000BFORWARDSBACKWARDSJOYSTICKJOYSTICK SHIFTINGDIRECTIONMOVEMENT CONTROLLED1FORWARDS LEFT TRACK FORWARDSBACKWARDS LEFT TRACK BACKWARDS2FORWARDS

4.1.3 PUSH BUTTONSThe buttons have a dual function: they can be used to select machine functions or as numeri‑cal keys in the service submenus.They in

BUTTONS 3‑9: (Not used)BUTTON 4:Used to enable control of the emergency descent from the basket. Confirma‑tion that the operation is enabled is displa

BUTTON 12:Allows the electric motor to be switched on/off. If the button is pressed with the motor on,this will be stopped.If the start buttons are pr

5 EMERGENCY DEVICESThe following information concerning the emergency devices is provided to help understandthe behaviour of the machine and the possi

5.2 HAND PUMPThe hand pump (2) is used to pressurise oil for emergency movements made necessary byany breakdown of the main hydraulic system.The hand

X14JR042011326.4 Using the elevating work platform (MEWP) ...Page 656.4.1 Preliminary checks before starting work ..

Considering the hazard deriving from the use of the platform during the bypass of thesafety devices, carefully read the paragraphs regarding the use o

motor. The main proportional valve is enabled only if all the conditions of the aerial partmovimentation are satisfied. This is indicated by the icon

‑ AERIAL PART HYDRAULIC DISTRIBUTORThe hydraulic distributor is fitted with levers and buttons for the selection of the requiredmovement, its directio

ROTATION HYDRAULIC DISTRIBUTORIt is positioned in front of the electric motor at the collector. TRACKED UNDERCARRIAGE HYDRAULIC DISTRIBUTOR4Second arm

Ref. DescriptionsActivation/movementPictograms inproximity of the control7Right travel controlMoving lever 7A:moves right track forwardMoving lever 7B

6. USING THE MACHINE6.1 SAFETY STANDARDS TO ADOPT BEFORE USING THE PLATFORM6.1.1 RISK OF ELECTROCUTIONIf the machine must be used near electric power

6.1.3 DANGER DUE TO THE WORK AREATHE MACHINE CAN ONLY WORK ON COMPACT AND LEVEL GROUND.Always verify that the slope of the ground in the platform posi

dual country. In countries where the law does not require the use of such safety systems,the employer and/or user is responsible for choosing the syst

6.3 WORK AREAX14JR042011364BOOM LIFT MODELS X14JJLG234567891011121323456112ROTAZIONE 360°PORTATA MASSIMA 120 Kg(1 Persona 80Kg+Cassetta attrezzi 40Kg)

6.4 USING THE ELEVATING WORK PLATFORM (MEWP)In the explanations contained in the following paragraphs, it is assumed that the operatorhas already read

X14JR0420113BOOM LIFT MODELS X14JJLG7.14 Checking for leaks in the hydraulic system...Page 1197.15 Checking the c

‑ When climbing into the basket, fasten the safety harnesses immediately to the appro‑priate fixing points before carrying out any operations. Remembe

6.4.2 STARTING THE PETROL/DIESEL ENGINEBefore starting the engine it is necessary to:‑ Become familiar with all the procedures described in the USER

THE ENGINE MUST BE STARTED WITH ALL THE CONTROL BUTTONS AND JOY‑STICKS IN NEUTRAL POSITION.Always make sure there are no foreign objects (e.g. branche

‑ If the operator attempts to start one of the two motors while the other is already run‑ning, starting will be impossible and the icon showing the m

The electric motor can only be considered stopped if one of the emergency stop buttonson the machine is pressed.Whenever a movement of the machine has

6.4.7 TRAVELThe JLG machine is a self‑propelled machine able to easily move on any type of ground, oversteep slopes (up to 15°) and, considering the s

TRAVEL PROCEDUREBefore travelling, proceed as follows:‑ Check that all instructions previously given in this chapter have been complied with.‑ Make s

6.4.8 PARKING THE MACHINE ON A SLOPE OR ON UNEVEN GROUNDWhen parking the machine on a slope or uneven ground with the stabilisers closed, makesure tha

The complete closure and alignment is displayed by the arrows on the machine (SEEPHOTO) and the display of the icon in position 6 on the radio control

‑ tabilisation will be completed when the machine is in horizontal position with toleranceof 1° and lifted at least 5 cm from the ground. Correct stab

PREFACEThe aim of this manual is to provide the user the necessary instructions and essential opera‑ting procedures to ensure correct and safe use of

Note: IT IS IMPORTANT TO REMIND THAT WHEN THE STABILISERS ARE LOWERED THE CARRIAGEMUSTALWAYS BE RAISED FROM THE GROUND.After using the manual stabili

6.4.10 AUTOMATIC LOWERING AND RAISING OF THE STABILISERSJLG elevating platform is fitted with an innovative automatic levelling procedure that acts on

the 4 stabilisers lower simultaneously without stopping till they touch the ground. If during lowering one of the stabilisers does not touch the grou

79BOOM LIFT MODELS X14JJLGX14JR04201136.4.11 MOVING THE BASKETOnce the machine has been stabilised correctly (check the icon in pos. 5) the basket can

PROCEDURE FOR ROUTINE MOVEMENT OF THE AERIAL PART• Before moving the aerial part, make sure that:‑ all instructions provided in this chapter have been

OVERLOAD ALARMIf during the basket loading phases the max allowable load is exceeded based on the positionof the jib arm, all movements of the aerial

6.4.12 MANUAL LEVELLING OF THE BASKETThe JLG elevating work platform is provided with an automatic basket levelling device thatwas designed so that th

83BOOM LIFT MODELS X14JJLGX14JR04201136.5 AERIAL PART EMERGENCY MANOEUVRESThe machine was designed considering possible emergency situations such as m

The message disappears when the lever is released.6.5.2 OPERATING THE MACHINE FROM THE EMERGENCY CONTROL POSITION ON THE GROUND IF THEOPERATOR IS TAKE

‑ If necessary, start the engine using the corresponding button.. ‑ Rotate the key selector in a clockwise direction and keep in position ‑ Check tha

Note: All of the photos and drawings in this manual have been added to simplify com‑prehension by the reader. Your machine may differ from the photos

‑ Turn the emergency key anticlockwise and hold itin position (see sticker).The display on the remote control will show the safety device BYPASS icon

6.5.4 EMERGENCY DESCENT CONTROLLED FROM THE GROUND IN THE EVENT OF SUDDEN OPERATORILLNESS, WITH THE MOTOR RUNNING AND ELECTRICAL SYSTEM FAULTThis emer

‑ At the end of the emergency operation, loosen the knob on the proportional valve com‑pletely and remove it, reclose the protection, if present, remo

keys group inside the electrical components compartment;‑ Insert the key and open the distributor controls’ protection, if any,to access the controls;

6.5.6 EMERGENCY OPERATIONS ON THE CARRIAGE: MOVING THE PLATFORM STABILISERS USING THEHAND PUMP TO ALLOW THE MACHIE TO BE TRANSPORTEDTo raise the stabi

91BOOM LIFT MODELS X14JJLGX14JR04201136.5.7 EMERGENCY OPERATION OF THE UNDERCARRIAGE IN THE EVENT OF MOVEMENTS OF THEAERIAL PARTDuring transport, the

B) Moving the undercarriage with the machine not aligned‑ Open the electrical components compartment;‑ Place the emergency key on the electrical compo

93BOOM LIFT MODELS X14JJLGX14JR04201136.6 ELECTRICAL DISCONNECTION OF THE REMOTE CONTROLThe electrical disconnection/connection operations of the mac

6.7 RECHARGING THE BATTERYTo check the battery charge, always use the special indicator shown on the display on theremote control.The batteries can be

95The battery charger supplied with the X14J elevating platform was designed to ensure safetyand reliable performance. It is already fitted on the mac