Jlg 120-SXJ Operator Manual User Manual download pdf (Page 68)

SECTION 4 - MACHINE OPERATION

4-18 – JLG Lift – 3121809

After towing the machine, complete the

following:

1. Actuate steer/tow selector valve for steering; push

valve knob IN to the actuated position.

2. Reconnect drive hubs by inverting disconnect cap.

(See Figure 4-9., Drive Disconnect Hub.)

3. Disconnect towbar from steering hitch and from tow-

ing vehicle. The machine is now in the driving mode.

4.16 SWING-AWAY JIB (120SXJ ONLY)

To Erect the Jib

1. Remove the lockpin from the jib plates.

2. With the aid of an assistant, swing the jib until

straight with the boom and the holes in the jib plates

align.

3. Install the lockpin through aligned holes in the jib

plates. The machine can now be operated from the

platform controls.

To S to w t h e J i b

1. Remove the lockpin from the jib plates.

2. With the aid of an assistant, swing the jib closed until

its alongside the boom and the holes in the jib plates

align.

3. Install the lockpin through the aligned holes in the jib

plates. The machine must now be operated from the

ground controls or the remote control box.

Figure 4-9. Drive Disconnect Hub

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 79 80

No comments

Jlg 120-SXJ Operator Manual User Manual Page 68